The hottest rotary joint is widely used in various

Rotary joints are widely used in various devices and materials

rotary joints are used in almost infinite fields, and are most widely used in various materials, viscosity, temperature, pressure and speed applications. Rotary joint is a unique and special product, because it must be able to rotate at a very high speed and bear a very high pressure at the same time. To achieve this, it is necessary to make the sealing surface achieve a nearly perfect fit, that is, the seal must be slightly overlapped, regardless of the pressure factor of the medium, so that the load or pressure loaded on the sealing surface is kept to a minimum, and the smooth and stable rotation and friction can be reduced to the minimum, so as to prolong the service life and ensure no leakage. So that the products manufactured have advanced technology, reliable quality and complete specifications, and have always been in the leading position in the same industry in China, and won the trust of our customers

the main products of rotary joints are: rotary joints, metal hoses, pipe compensators (expansion joints), quick change joints, hydraulic quick joints, stainless steel quick joints, pneumatic quick change joints and other sealing supporting products. It is widely used in steel, special converter joints, rotary joints, hydraulic slip rings, blast furnace clay gun hydraulic joints, continuous casting rotary joints, heating furnace rotary joints, papermaking, packaging, chemical industry, rubber, plastic, textile printing and dyeing, glass, starch, petroleum, medicine, washing, tobacco, drying, electric power, food and other industries

the other end of the stainless steel rotary joint on the pipe away from the vibration source should be effectively fixed, so that the rotary joint can isolate and absorb vibration. 9. The maximum stroke of the piston (mm) is 250. During electric welding on the construction site, the bellows shall be effectively protected to prevent welding slag from splashing the bellows. The stainless steel rotary joint must be installed in a straight line without bending or translation. After installation, lock the nut and backup nut on the pull rod when installing the handsaw, and do not remove the pull rod and remove the nut. The medium shall not be corrosive to the bellows material. The chloride ion content in the medium shall be properly adjusted by the pull rod during installation. The adjustment amount shall not be greater than the specified value during the process of winding the steel wire with the specified number of turns

this article comes from the Internet, and the copyright belongs to the original author 4 The operation of the granulator is available for everyone to share and learn. If the author believes that infringement is involved, please contact us, and we will delete it immediately after verification